How to make a mirror on a wooden partition

100% of 100%
Mirror, mirror on the wall. This is the fairest of them all. You can make this mirror in just a few simple steps. The shelves next to it keep your stuff handy and allow you to decorate the mirror.
  1. Step 1: Saw a 25cm strip off the board, so you have a 160x100cm board and a 160x25cm strip.
  2. Step 2: On the 25cm strip, mark off shelves for the mirror.
  3. Step 3: Use the V groove on the planer to round off the side of the large board and the front and sides of the shelves.
  4. Step 4: Mark off where the shelves will be placed on the large board (use a spirit level) and drill the holes.
  5. Tip

    If you use 4mm screws, drill the holes with a 3mm drill bit.
  6. Step 5: Insert the screws into the plank, leaving the top sticking out.
  7. Step 6: Mark off where the screws will be on the shelves and drill the holes.
  8. Step 7: Screw the shelves in place.
  9. Step 8: Fix the mirror in place with the supplied clamps (or glue it down if that’s the type of mirror you have) and fill the shelves with nice stuff.

Rating

Rate this step-by-step instruction.

How to make a mirror on a wooden partition

5
5 of 5

1 total

  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0